in

A Guide to Making Your Pool Energy-Efficient

Do you have a pool, but you stress about how it could waste more energy?

 Do you want to get a pool but are afraid to see a major hike in your electricity bill?

 If yes, this blog is just for you.

Scroll down to read everything that you need to know about making your pool more energy-efficient.

Why Should You Make your Pool Energy-Efficient?

Before we delve deep into making the pool more energy-efficient, here are all the reasons why you should consider making your pool energy-efficient.

1- Cuts Down on Costs

The biggest reason you should consider making your pool energy-efficient is that it cuts down on utility bills. House pools cost a lot and are considered a luxury that most people can’t afford.

If you still want to have an indoor pool, the most affordable way to get one is to cut down on energy. This will reduce the electricity bill, water bill, and the cost of many other pool design renovation bills.

2- Is More Environment Friendly

Another reason to make your pool energy-efficient is to play your part in helping save Mother Earth. Scientists have indicated that the earth has limited energy and water resources and to use them smartly is essential for a better, more sustainable future.

Making pools more energy-efficient will cut down on energy usage and even help minimize carbon footprint.

This is why your pool design should be energy efficient and environmentally friendly.

3- Pay Fewer Taxes

This may surprise you, but various states offer a discount in taxes for energy-efficient pools. The conditions for fewer taxes revolve around installing energy-efficient resources in your house, which can be applied to energy-efficient pools.

How-To Make your Pool Energy Efficient

After knowing the benefits of making your pool energy-efficient, it’s time to make things more energy-efficient.

Scroll down to read all the renovations and changes you can make in your pool design to make your pool energy-efficient.

1- Only Use Pool Heater When Needed

If you have a pool heater installed, it’s time to cut back on its usage. Turn off your pool heater over the night or when your pool is not in use. You can also turn off your pool heater when you leave for any vacation that would last multiple days.

But, do this only if you don’t expect near-freezing temperatures back home.

2- Use Dark Colors

Another step you can take to ensure that your pool saves maximum energy is to use dark-colored pool tiles. Dark colors like black, dark-blue, etc., absorb a lot of energy and would heat your pool naturally.

This would allow you to cut down on using your pool heater; thereby, saving you more money.

3- Reduce Pool Pump Speed

Another way through which you can cut down on energy usage is by reducing pool pump speed. Try to put on the pool pump at the minimum possible speed. Slow pumping would reduce power consumption, making your pool more energy-efficient.

4- Switch to Energy-Saving Lights

The lights that you use inside or around your pool cost a lot. This is why it’s important to switch to pool lights to cut down on energy consumption.

LED lights are a highly energy-efficient lighting option and are known to reduce electricity bills. Therefore, it’s important to switch to LED lights. These lights not only cut down on the electricity usage but also look good. In short, it’s a win-win solution for you!

5- Only Use Pool Filtration in Off-Peak Hours

Another important step you can take to cut down on energy consumption is using your pool’s pump filter in off-peak hours only.

Off-peak hours are those where the electricity demand and the electricity costs are low. The time varies from state to state, but it’s somewhere around 8-10 am in most states.

6- Clean your Pool Regularly

While choosing a pool design, opt for a cleaning system that would not get stuck in case of too much debris.

Moreover, it’s important to clean your pool’s cleaning system frequently, so it stays clear. A dirty cleaning system would result in a dirty pool, and you would have to use pool filtration to get rid of that.

This would add to the energy consumption.

Clean House Pool

Tools to Make your Pool Energy-Efficient

Here’s a list of some tools that can help improve your pool’s efficiency.

1- Use Solar Technology

Sunlight is the biggest source of energy for us.

Installing solar panels to run your pool filters, pool heaters, and lighting is the biggest energy-efficient investment you can make. You can also use a solar-powered cleaner to swipe debris from your pool surface.

Once you switch to solar energy, you’ll automatically cut down on all the energy use and electricity bills.

Solar Panels

2- Power-Cutting Pump Filters

Another tool you can use to make your pool design more energy-efficient is to install a pump filtration system that consumes less electricity. Set it on the less setting mentioned above, and see your pool become more energy-efficient and eco-friendly.

3- Windbreakers

Not many people know about this but installing windbreakers is another huge step toward saving more energy.

If you live in a windy area, your water evaporation rate will be excessively high. Even in areas with low to moderate winds, water evaporation occurs all the time.

Windbreakers are necessary to save your pool water from evaporating too much. Windbreakers are known to cut down energy consumption by a huge number. Most importantly, windbreakers should be tall and near enough to the pool to break down the wind.

Pool with walls

The Bottom Line

An energy-efficient pool seems like a basic need today. Pool owners can achieve this by consulting a professional pool designer and discussing pool designs that offer maximum energy efficiency.

If you’re looking for a pool design company in Northern Virginia, consult Perfect Pools. The company offers pool designing and pool building services all across Virginia.

This post was created with our nice and easy submission form. Create your post!

What do you think?

Advocate

Written by Clark Andrews

Leave a Reply

What is SEO?

6 Ways Personal Trainers Can Attract New Clients